WATER BLADDERS
Bladders have been developed which come with all inlet and outlet pipes required for complete installation. They can generally store between 2,000 and 20,000L of water. The sizes and capacity vary according to length and width of the bladders.
The bladders are sealed yet flexible, with an enormously high puncture resistance that is designed to be securely located in the sub-floor space in areas as low as 750 mm in height (without excavation) and without inducing any structural load to the dwelling.
By placing the bladders under a house or deck, they can collect ALL of the rain that falls on the roof by diverting the ALL downpipes to a common in-flow pipe which goes into the side of the bladder. This means that more rainwater can be collected much faster than in a traditional water tank. Once the bladder or bladders are full, any excess water diverts to the existing storm water system so that there is no fear of over-filling.
If space permits, multiple bladder tanks can be installed either end-to-end or side-by side for maximum storage, as demonstrated in the diagram below. Bladders are typically designed to fill to a maximum height of 600mm.
The above information was souced from: http://www.rainharvesting.com.au/bladders.asp
AUSSIE BLADDA water tanks
The Aussie bladda Tank is a flexible bladder designed to fit under the floor of your home or decking, allowing you to store large amounts of rain without taking up valuable space in the backyard.
FEATURES
· No unsightly tank taking up space in your yard.
· Easy installation in areas with limited access.
· No big holes to dig.
· UV Stabilized (resists hardening or cracking).
· Glass fibre reinforced polypropylene with welded seams for added strength.
· Proof against rodents and native animals.
· No frames required as it is self-supporting.
· Overflow to storm drain
· It can capture rainwater from most of the roofed area rather than one or two down pipes as is the case with conventional storage systems.
· Easily connected to existing garden systems from a 25mm outlet.
· Choice of 50mm, 80mm or 100mm inlet.
· Roll it up and take it with you when you move home.
· Boxed for easy transport (min weight 16kg).
· Can store drinkable water.*
· 10 year warranty.
· Eligible for Government Rebate.
· 100% Australian Owned, designed and manufactured
Information on the Aussie Bladda can be sourced from:
Sizes and capacities of the Aussie Bladdas can be sourced from:
No comments:
Post a Comment